Matthew Lane DrMS Version 5 – Everything Recording
Thanks for watching! The middle of the GUI features a large and well-designed stereo phase scope, which is certainly nice to look at while mixing; my only request for future versions in this department would be a phase correlation meter, as I often found myself relying on a secondary tool just for this when expanding the stereo field with DrMS. There’s also a handy Auto Gain feature which is enabled by default, for easy level matching between input and output as you tweak parameters. In Use The first key to understanding the power DrMS holds for manipulating the stereo field—and to why it differs substantially from other stereo tools—is exploring what exactly each of the plugin’s main four signal paths does.
Mathew Lane releases StereoDelta Plugin for 3D audio
Thanks for watching! The middle of the GUI features a large and well-designed stereo phase scope, which is certainly nice to look at while mixing; my only request for future versions in this department would be a phase correlation meter, as I often found myself relying on a secondary tool just for this when expanding the stereo field with DrMS.
There’s also a handy Auto Gain feature which is enabled by default, for easy level matching between input and output as you tweak parameters. In Use The first key to understanding the power DrMS holds for manipulating the stereo field—and to why it differs substantially from other stereo tools—is exploring what exactly each of the plugin’s main four signal paths does.
Mid and Side are fairly self-explanatory; Mid is the mono portion of your signal, while Side is the stereo portion of your signal portions of the signal where there’s a difference between the Left and Right channels. Focus and Field, however, are unique to DrMS, and it takes a bit of manual reading and experimentation to get a grasp of what exactly these do. The Focus knob allows you to send a variable amount of the unprocessed mid signal to the side signal of the plugin’s stereo output, while the Field knob allows you to do precisely the opposite, sending the unprocessed side signal into the mid signal of the plugin’s stereo output.
While this might sound complex, it’s rather simple in practice; using DrMS, you can completely invert the stereo content of your signal—turning what was the mid into the side, and vice versa—which to my knowledge, is something no other plugin is capable of. Before we dive into some more advanced uses of DrMS, there are some more basic studio tasks that it excels at that are worth considering. First and foremost, DrMS is by far the most useful tool I’ve found to fix stems, mixes or single tracks that have been treated with too much stereo spread from other stereo plugins; any engineer working in Electronic or Hip-Hop mixing will tell you this isn’t an infrequent occurrence these days, and source material that’s been given excessive stereo spread will typically collapse disappear on mono playback systems, creating playback issues at clubs, festivals, and on small radio systems.
DrMS is also highly useful in everyday mix situations; having an easily adjustable HPF and LPF with adjustable slopes for both the Mid and Side channel is useful in cleaning up and shaping the high and low end of individual tracks, busses, and the mixbuss. The real fun with DrMS begins when you dive into some of the stellar included presets which make judicious use of the Focus and Field controls—the presets cover a wide range of mix scenarios, from subtle mixbuss enhancement or repair to far more creative settings appropriate for single track sound processing and mangling.
In use, I found manipulating the stereo field using both Focus and Field—passing some mono information to the sides, some side information to the mid, and EQ’ing both differently using the plugin’s built-in HPF and LPF—could both solve a wide range of mix issues and be highly useful in creative sound design.
The Feedback knob—which lets you mix in a variable amount of the Focus and Field channels feeding back into each other—can also produce some highly unusual results when used for sound design, and it’s capable of creating an analog-style feedback loop when pushed hard.
Single tracks or busses that felt like they were sitting too wide in the mix often benefitted from some high and low pass filtering on the side signal, along with passing some of the side into the mid using the Field control , and shaping this with more filtering and, in some cases, experimenting with the Field ‘Delay’ setting, which shifts the side signal in time against the mid signal.
Using DrMS, for example, it’s possible to tame the excessive stereo feel of a heavily chorused and reverbed synth patch while retaining the overall ‘vibe’ and space of the sound using the Field and Focus controls. While we’re on the topic of stereo widening, DrMS is also one of the best tools I’ve found for adding natural ‘stereo’ signal to a sound or mix without turning the entire thing into a phasey mess once it’s collapsed back to mono on certain playback systems. The Focus control acts as a superb widening tool—in addition to the more obvious and conventional use of the Side controls—especially when it’s used with some aggressive filtering and a delay time that falls somewhere in Haas territory ms.
In my testing, DrMS was often capable of a natural widening sound that still holds up rather well in mono playback, which cannot be said for many popular stereo widening tools on the market today. DrMS offers a novel control set and functionality that we simply haven’t seen in any other processors to date, and the range of results you can get with the plugin spans the subtle to the truly unique. While experienced engineers and producers are likely to get a bit more mileage out of this one than someone just learning the basics of Mid and Side processing, the excellent included presets provide an easy tour of what the plugin is capable of across a wide range of mix situations.
If you’re looking for a tool to solve just about any stereo issue you’re having, it’s hard to find a better option than DrMs. Highly recommended. Superb for stereo widening which retains mono compatibility. Excellent for fixing ‘too-wide’ mixes, busses, and sounds.
Cons GUI is beautiful, but a correlation meter would be useful.
This might also interest you
The Mathew Lane DrMS is a unique spatial processor plugin based on Mid/Side processing, with a wide range of applications for mixing, mastering and. DrMS is a unique spatial processor, available as AAX/RTAS/AU/VST plugin, with a wide range of applications for mixing, mastering and post production – going. DrMS VST for WIN goes FL Studio compatible with v! Check http://www. xtfaeg.me for download & demo!.
It can detect and block all the malware attacks and virus. If our system crash suddenly, it will give immediate backup of our data. Furthermore, it can identify our drive partition information which may be a loss. Also, it makes our recovery clear and safe. It will give us a preview to ensure recovery.
Making extreme stereo imaging simple.
We can recover our accidentally and unintentionally deleted data. It can easily recover data during formation. It can also manage our data even if our hard disk is failing.
HOWTO VIDEO: Mathew Lane – DrMS – Plugin Alley
Focus on your stereo field. DrMS is a unique spatial processor, available as AAX/ AU/VST/VST3 plug-in, with a wide range of applications for mixing, mastering. I’m normally not a fan of one-knob style plugins, but StereoDelta simplifies the critically acclaimed DrMS spatial processor plugin. Mathew Lane DrMS V5 Spatial Processor Plugin. Native AAX64/RTAS/AU32/ AU64/VST32/VST64 plugin for OSX & Windows. Spatial audio processing – Zoom .